 |
|
The Large Capacity Glassware Washers offer high volume throughput of virtually all sizes and types of laboratory glassware and plasticware. Two sizes are available in 29" and 42" width, holding 4 or 6 baskets per loading shelf (maximum 2 loading shelves.) Each washer is equipped with our advanced System 25 controls. The control system features an industrial duty PLC and a large, bright, touch screen operator interface. Select from any one of 23 cycles, 3 of which are factory programmed for simple cleaning processes, and 20 of which are user definable for the most difficult cleaning challenges. The System 25 controller provides complete control of the washer allowing the user to develop sophisticated protocols using our programming wizard that guides you step by step through the process. At each step of the cycle you can select water source (hot, cold, DI), temperature up to 95ºC (203ºF), duration up to 99 minutes, and treatment options. Cycle status is displayed during operation, and an alarm chime alerts the operator of any fault conditions. System can be password protected at 4 different levels for security, or password protection can be disabled for convenience.
Models 4400 and 6600 feature our exclusive dual plumbing option for the most critical applications. These washers have separate piping for recirculated water and deionized water. By having separate plumbing systems each successive fill doesn't have to start with the contents left in the piping from the last step in the cycle. So your DI flush/rinse doesn't start with left over rinse water. This maximizes your cleaning effectiveness and minimizes the chance of cross contamination.
Each model features 316L stainless steel wash chamber, liquid detergent and neutralizer dispensing pumps (the washer will accommodate 2 additional pumps, 4 total), vertical sliding tempered glass door, interior light, 304 stainless steel cabinet, drain discharge tempering system (max 140ºF), and drying system (up to 105ºC). The exclusive linear moving spray arch system combined with ample stationary spray nozzles provides corner-to-corner cleaning power and assures all items are properly cleaned eliminating the "dead spots" typical of rotary spray arms. Spindle headers are available for narrow neck flasks.
FEATURES
• Wash chamber constructed of 316L Stainless Steel.
• Power, vertical opening tempered glass door.
• Double walled chamber, fully insulated to conserve energy and to provide quiet operation.
• Exterior constructed of 304 Stainless Steel.
• 2 level loading with bottom and middle linear spray arch system for maximum throughput and cleaning effectiveness
• Industrial duty PLC control with touch screen user interface and display.
• 20 user selectable wash cycles, 3 factory programmed (light, medium, and heavy)
• Drain discharge temperature control (less than 140ºF)
• Oversized easily removable debris screen
• Selectable water temperatures up to 95ºC
• Selectable drying temperature to 105ºC
• Selectable cycle step times up to 99 minutes.
• Automatic, adjustable, precise dispensing of detergent, neutralizer and up to two other additives with low level alarm chime.
• ETLandcETL listedto UL STD 921.CE certified
Options and Accessories
• Additional chemical treatment dispensing pumps
• Spindle Racks
• Carboy Cleaning Rack
• Pipette soaking box
• Glassware Baskets
• Steam condenser
• Pure water storage tank
• Heated pure water rinse
• Uninterruptible power supply for control system with auto pause and restart
• Installation kit
• DI Water Booster Pump, Tap Water Booster Pump
• Remote mounted printer
• Loading Carts
Specifications and Performance Data
Chamber Volume
ft³ (liters) |
11.8 (334) |
17 (481) |
| Chamber Material |
316L Stainless Steel |
316L Stainless Steel |
| Exterior Material |
304 Stainless Steel |
304 Stainless Steel |
Exterior
Dimensions
WxDxH
inches (mm) |
55x36.25x78.25
(1404x921x1988) |
69x36.25x78.25
(1751x921x1988) |
Chamber
Dimensions
WxDxH
inches (mm) |
29x27x26
(736x686x660) |
42x27x26
(1067x686x660) |
| Loading Levels |
2 |
2 |
Shelves Supplied
Area per shelf ft²
Total Shelf Area ft² |
2
5.4
10.8 |
2
7.9
15.8 |
| Basket Capacity |
8 |
12 |
| Drying Cycle |
Standard |
Standard |
Dosing System
Standard
Max |
2
4 |
2
4 |
Spindle Header
Capacity |
4 |
6 |
Clearance inches (mm)
Single Shelf
Upper Rack
Lower Rack |
25 (635)
13.5 (343)
7.5 (190) |
25 (635)
13.5 (343)
7.5 (190) |
| Wash Cycles |
3 Preset and
20 User defined |
3 Preset and
20 User defined |
Temperature
Wash/Rinse
Dry |
95°C
105°C |
95°C
105°C |
Utilities
Tap Water (hot and cold)
DI Water
|
20gpm (76L/min) @ 25-45psig (1.7-3.1bar)
20gpm (76L/min) @ 25-45psig (1.7-3.1bar)
less than 12 Megaohm/cm resistivity |
20gpm (76L/min) @ 25-45psig (1.7-3.1bar)
20gpm (76L/min) @ 25-45psig (1.7-3.1bar)
less than 12 Megaohm/cm resistivity |
| Exhaust |
80cfm |
80cfm |
| Drain |
1.5" Copper with 1" air gap (90gpm), max discharge temperature of 140°F |
1.5" Copper with 1" air gap (90gpm), max discharge temperature of 140°F |
| Electrically Heated |
80 Amps |
80 Amps |
| Steam Heated |
30 Amps |
30 Amps |
Steam Supply
(Steam Heated Only) |
120lbs/hr (54kg/hr)
60-80psig (4.1-5.5bar) |
150lbs/hr (68kg/hr)
60-80psig (4.1-5.5bar) |
Electrical Data
(Alternatives available) |
230V, 60Hz |
230V, 60Hz |
Ship Weight
lbs (kg) |
885 (450) |
970 (470) |
